For the 2nd year Tesco Productions has had the privilege of recording the Vivace’ Select Choir as they prepared for their annual music video. The song chosen was an arrangement of “Give Me Jesus”. The pre-recording of the audio was done on location where MKS Studio conducts their classes. The space proved to be quite ambient, but that also lent a natural live space to the sound and enhanced the choral presentation. The new video can be found here. Thank you for having Tesco Productions again be a part of this special presentation.

The ongoing saga of updating the Tesco Productions studio added a major chapter this month with the completion of the new laminate floor. The project started of course with the removal of the old parquet floor tiles, and then the arduous job of getting off the glue residue. I chose what was maybe not the “best” method (as it created a huge amount of dust), but it left a very clean floor readied for its replacement. A neighbor helped get the project started (for which I’m very grateful) and then I was able to spend parts of the next few days and finish it up! This portion of the work was literally “foundational”, as the upper equipment rack had been emptied and removed to relieve weight on the supporting lower rack spaces (which also were emptied). Those racks have a number of wires that are intertwined through walls and doorways to other studio areas, making it impossible to totally remove that furniture from the engineering room. So a bit of ingenuity was used to suspend those off the floor so a section of flooring could be pre-assembled and then slid into place underneath them. I plan to post some pictures of the process and the final result, but suffice it to say I’m extremely relieved to have that part of the work behind me. And oh, I almost forgot to mention I also resized a wall acoustic panel to accommodate the depth of the new rackmount console. My wife helped me select a new patterned cloth covering for the panel – the first recovered panel with more updates planned for most of the others. Now onto getting those racks reassembled, wires to patchbays added/rearranged, new and existing equipment put in place and connected, and so on (did I mention a lot of dust – there’s still some cleaning to do), but the proverbial “light at the end of the tunnel” is beginning to shine.

There’s no delay or turning back now. Virtually all reworks start with undoing, and such was the case last Friday when my friend Jim came over and got on one end of many wires no longer needed in the studio. I’m not sure he would have volunteered once he saw just how big of a job it was to remove that much cabling. I knew it would be a high number, but even I was surprised by the height of the coiled pile those cables created once removed. A lot of it had been installed for over 25 years.

The new system actually has more connection capacity than any prior setup, but with the new one comes more streamlined and compacted interconnectivity – such as digital ethernet snakes. And now instead of 4 interfaces, the new digital console will also serve as a single interface unit. So the studio now looks to be quite in shambles with 2 equipment racks emptied, 4 patchbays orphaned, and dozens of wires still “hanging out” that will be rerouted to the new system (along with other additional new ones).

And while I’m at it, I thought it was high time to address the original and later expanded desk tops that had gotten kind of tired. 35+ years of wear and tear by chair bumps, coffee spills, hole drilling and re-drilling, patchbay reworkings and such is calling for a restart on those surfaces. So today with spring weather here, the final cuts were made on the two main pieces and a sealer and stain applied.

In the meantime, what to do about my ongoing weekly work? Well it turns out that the new system is so self-contained and most of those needs only require that I hear the audio (all imported files – no recording), with two connections from a portable interface to a pair of the patchbay monitor inputs I was back in business (after rounding up the driver for the interface). It will definitely be great to get most of the studio back to a semblance of normalcy and expanded function, but in the meantime there’s no getting around this phase if you want to enjoy the full benefits of the new. There must be a proverb in there somewhere?!